Immunization Effect of Sodium Aluminate on Wool
Research and development
Authors:
- Sirvaityte Justa
JSC Plungės kooperatinė prekyba “Viciunai group”, Plunge, Lithuania - Beleska Kestutis
Department of Polymer Chemistry and Technology, Kaunas University of Technology, Kaunas, Lithuania - Alaburdaite Rasa
Department of Physical and Inorganic Chemistry, Kaunas University of Technology, Kaunas, Lithuania - Komiciute Ineta
Department of Polymer Chemistry and Technology, Kaunas University of Technology, Kaunas, Lithuania - Valeika Virgilijus
Department of Physical and Inorganic Chemistry, Kaunas University of Technology, Kaunas, Lithuania
Nr DOI: 10.5604/01.3001.0010.4626
Full text | references | Abstract: Since the environmental requirements for leather manufacture as well as for other industry branches are becoming stricter, investigations of unhairing have been directed towards conditions of the process which allow the saving of hair: enzymatic unhairing or unhairing with hair immunization conventionally achieved by using lime and sodium sulphide. The problem is that lime forms a big quantity of liquid waste which contains lime sludge polluted by sulphides and protein degradation products. The research is devoted to the replacement of Ca(OH)2 as hair immunization material with some other soluble non-hazardous material with a similar immunization effect. The preliminary tests showed that alkaline sodium aluminate suits this purpose very well. Its immunisation efficiency increases with prolonged treatment duration and increased concentration of the treatment solution. Treatment with 20 g/l of sodium silicate solution for 3 h allows to reach a high immunization ability almost the same as that of calcium hydroxide under the same conditions. The immunisation effect lasts when the pH is approx. 13. |
Tags:
immunization, wool, keratin, sodium aluminate, sodium sulphide.
Citation:
Sirvaityte J, Beleska K, Alaburdaite R, Komiciute I, Valeika V. Immunization Effect of Sodium Aluminate on Wool. FIBRES & TEXTILES in Eastern Europe 2017; 25, 5(125): 42-46. DOI: 10.5604/01.3001.0010.4626
Published in issue no 5 (125) / 2017, pages 42–46.